Image
Product
Price
- Screamer Turbo Manifold Kit;
- Screamer Turbo Manifold Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Drops In Stock Location
- Can Support Modifications Up To 690Hp
- Each Actuator Is Calibrated And Tested Prior To Shipping
- VSR High Speed Balanced
- Pre-Drilled For Pyrometer Probes
- Gasket/Bolt And Spacers Kits Are Available Separately
- 6.7L Performance Stock Replacement Manifold For Use With The Holset He351 Turbo
- Thick Walled Casting And Integral Slip Joint Prevents Cracking And Exhaust Leaks
- Fully EGR Compatible
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QTS turbine wheel results in reduced Backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Iron Horn Turbocharger Kit
- S364SXE/80 0.91AR; Flow 82 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit
- Iron Horn Turbocharger Kit; S364SXE/80 0.91AR; Flow 82 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit;
- Iron Horse Turbocharger Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Replaces OEM VGT Turbo Providing Enough Air
- For More Power/Response/Reliability
- Turbo Utilizes High Flow T4 Turbine Housing
- Designed For Perf. w/360 Thrust Bearings/Compressor Wheel/Housing
- High Strength FMW Forged Milled Wheels Are Lighter And Stronger
- No Extra Piping Required
- Drops In Place Easy Clean Installation
- 64.5mm 2.54 in. Comp Wheel/80mm 3.15 in. Turbine Wheel
- Approximate Rated 550 HP Depending on Truck Configuration
- If you are looking for an easy economical turbo upgrade, or, replace your tired turbo and aging exhaust manifold, then BD's Iron Horn series for your 3rd generation 5.9L Cummins offers a clean, drop-in installation. Featuring BorgWarner SX-E cartridges and 2-piece pulse exhaust manifold, BD's Iron Horn turbocharger kits are engineered to give optimal performance while reducing EGT's and high drive pressures. The Iron Horn is available in a number of configurations to match your performance level without compromising drivability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Iron Horn Turbocharger Kit
- S363SXE/80 0.91AR; Flow 82 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit
- Iron Horn Turbocharger Kit; S363SXE/80 0.91AR; Flow 82 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit;
- Iron Horse Turbocharger Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Replaces OEM VGT Turbo Providing Enough Air
- For More Power/Response/Reliability
- Turbo Utilizes High Flow T4 Turbine Housing
- Designed For Perf. w/360 Thrust Bearings/Compressor Wheel/Housing
- High Strength FMW Forged Milled Wheels Are Lighter And Stronger
- No Extra Piping Required
- Drops In Place Easy Clean Installation
- 63mm 2.48 in. Comp Wheel/80mm 3.15 in. Turbine Wheel
- Approximate Rated 550 HP Depending on Truck Configuration
- If you are looking for an easy economical turbo upgrade, or, replace your tired turbo and aging exhaust manifold, then BD's Iron Horn series for your 3rd generation 5.9L Cummins offers a clean, drop-in installation. Featuring BorgWarner SX-E cartridges and 2-piece pulse exhaust manifold, BD's Iron Horn turbocharger kits are engineered to give optimal performance while reducing EGT's and high drive pressures. The Iron Horn is available in a number of configurations to match your performance level without compromising drivability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Iron Horn Turbocharger Kit
- S363SXE/76 0.91AR; Flow 79 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit
- Iron Horn Turbocharger Kit; S363SXE/76 0.91AR; Flow 79 lb/min.; Includes Turbo/ORBM16x1.5 Plug/Oil Drain Gasket/Fitting/Bolt/T4 Manifold Kit/T4 Gasket Kit;
- Iron Horse Turbocharger Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Replaces OEM VGT Turbo Providing Enough Air
- For More Power/Response/Reliability
- Turbo Utilizes High Flow T4 Turbine Housing
- Designed For Perf. w/360 Thrust Bearings/Compressor Wheel/Housing
- High Strength FMW Forged Milled Wheels Are Lighter And Stronger
- No Extra Piping Required
- Drops In Place Easy Clean Installation
- 63mm 2.48 in. Comp Wheel/76mm 2.99 in. Turbine Wheel
- Approximate Rated 550 HP Depending on Truck Configuration
- If you are looking for an easy economical turbo upgrade, or, replace your tired turbo and aging exhaust manifold, then BD's Iron Horn series for your 3rd generation 5.9L Cummins offers a clean, drop-in installation. Featuring BorgWarner SX-E cartridges and 2-piece pulse exhaust manifold, BD's Iron Horn turbocharger kits are engineered to give optimal performance while reducing EGT's and high drive pressures. The Iron Horn is available in a number of configurations to match your performance level without compromising drivability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 4 of 4 products
Loading...